Dishwasher Not Draining? Causes, Safe Checks and Costs

Standing water after a cycle is usually a clog you can clear: the filter, the drain hose, the air gap, or the garbage disposal connection. If the dishwasher still won't drain once those are clear, the drain pump or controls likely need service.

Stop and call a pro now if

  • Water is leaking onto the floor or under the cabinets. Turn off the dishwasher's breaker and the water supply valve under the sink, and call for service.
  • You smell burning or see scorching. Turn off the breaker and don't run the dishwasher.

Likely causes

  • A clogged filter or sump

    Food, labels and broken glass collect in the filter at the bottom of the tub and block the drain.

  • A kinked or clogged drain hose

    The hose under the sink can kink when things are pushed into the cabinet. Old hoses can collapse or clog.

  • A clogged sink drain or garbage disposal

    The dishwasher usually drains into the sink plumbing or disposal. If that is clogged, the dishwasher can't empty. The inlet where the hose joins the disposal or sink tailpiece can clog with grease even when the sink drains fine.

  • The disposal's knockout plug is still in

    If a garbage disposal was just installed or replaced, the plug inside its dishwasher inlet must be knocked out. Otherwise the dishwasher can't drain into it. A plumber or installer can do it quickly. If you do it yourself, switch off and unplug the disposal first and remove the loose plug from the grinding chamber.

  • A clogged air gap

    Some sinks have a small cap on the counter, called an air gap, that the drain water passes through. Debris inside it can stop draining. Some local codes require an air gap rather than a high loop.

  • A missing high loop

    Without an air gap, the drain hose needs a high loop under the counter to the height in your installation instructions. Without it, sink or disposal water can flow back into the tub and sit there.

  • Too much suds

    The wrong detergent, such as dish soap, or too much detergent can foam enough to stop draining.

  • A failed drain pump or control

    If everything above is clear and you hear humming without draining, the pump or its control may have failed.

What you can safely check

Turn the dishwasher off at the breaker or unplug it before reaching into the tub. Expect some water when you open the filter area.

  1. Know what's normal

    GE notes that on models without an ultra-fine filter, a cup or two of clean water in the bottom is normal. Water covering the tub floor is not.

  2. Clean the filter

    Twist out and rinse the filter assembly, then remove debris from the sump. Look for broken glass before you reach in. Some older models have no removable filter. If yours doesn't, skip this step.

  3. Run the disposal

    If there is a disposal, run it with cold water to clear the shared drain. Never put your hand inside a disposal, and don't pour chemical drain cleaner into the dishwasher. GE warns against it.

  4. Check the hose under the sink

    Look for kinks or a hose crushed by stored items. Confirm there is a high loop if you don't have an air gap.

  5. Clean the air gap

    If there is a cap on the sink deck, lift it off and clean out debris. A clogged air gap often spills water onto the counter while the dishwasher drains.

  6. Think about recent changes

    A new disposal points to the knockout plug. A recent switch to a different detergent points to sudsing.

  7. Run a drain or cancel cycle

    Once things are clear, run a rinse or cancel/drain and see whether the water drains.

Avoid these

  • Removing the drain pump or working on wiring under the dishwasher.
  • Clearing a clog in the household drain line beyond the sink trap.

When to call a pro

  • The filter, hose, air gap and sink drain are clear and the water still won't drain.
  • You hear the pump hum or buzz without draining, or it is silent.
  • There is a leak under the dishwasher.
  • An error code appears that points to the drain.

If the sink itself drains slowly too, the clog may be in the household plumbing and a plumber may be the better first call.

Typical repair costs

National ranges from HomeGuide for dishwasher repair, parts and labor included.

Repair Typical cost Source
Typical dishwasher repair $100–$300 HomeGuide
Filter cleaning or replacement $90–$175 HomeGuide
Drain hose replacement $80–$180 HomeGuide
Air gap repair $80–$150 HomeGuide
Drain pump replacement $100–$400 HomeGuide
Control board replacement $200–$600 HomeGuide
Motor replacement $350–$500 HomeGuide

HomeGuide suggests replacing instead of repairing if the dishwasher is more than 8 years old or the repair is over half the cost of a new one. A new dishwasher runs $600 to $1,700 installed.

Frequently asked questions

Is some water in the bottom of a dishwasher normal?

On many models, yes. A small amount of clean water in the sump is normal. Water covering the bottom of the tub is not.

Why won't my new dishwasher drain?

If it drains into a new or replaced garbage disposal, the knockout plug inside the disposal's dishwasher inlet is often still in place.

Can I use drain cleaner in my dishwasher?

No. GE advises against chemical drain cleaner in a dishwasher.

What is a dishwasher air gap?

A small fitting on the sink deck that prevents dirty sink water from flowing back into the dishwasher. When it clogs, the dishwasher may not drain.

Sources

  1. Dishwasher - Not Draining , GE Appliances
  2. Not Draining - Newly Installed - Dishwasher , Whirlpool
  3. Dishwasher Repair Cost , HomeGuide