10 Government Energy Rebates Available in 2026 (2026 Guide)

1. High-Efficiency Heat Pumps up to $1,000 per Ton

Clean Heat RI provides up to $1,000 per ton for high-efficiency electric heat pumps, covering 50% of installation costs for standard upgrades.[1] Qualifying units must meet ENERGY STAR standards, reducing heating bills by 40-50% annually. Average install cost is $5,000-$8,000 for a 3-ton system, yielding $3,000 rebate.

1-2 days for install Licensed HVAC contractorEnergy audit kit

Pro tip: Pair with electrical panel upgrades for additional 50% rebate up to $700 if needed, boosting total savings to $1,700 per ton.

2. High-Efficiency Electric Heat Pump Water Heater up to $600

Rhode Island Energy offers a flat $600 rebate on ENERGY STAR certified electric heat pump water heaters with UEF ratings above 3.0.[1] These units cut water heating costs by 30-50% compared to standard electric models. Typical cost is $1,200-$2,000 installed, with payback in 2-3 years.

4-6 hours Pipe wrenchVoltage tester

Pro tip: Opt for split-system models to qualify for up to $1,500 via CleanHeat RI, doubling savings on larger homes over 2,000 sq ft.

3. On-Demand Natural Gas Water Heaters up to $600

Rhode Island Energy rebates up to $600 for high-efficiency on-demand or storage natural gas water heaters, covering 25-30% of $2,000-$2,500 install costs.[1] Upgrades save 30% on annual heating expenses, or about $150-$200 yearly for average households. Efficiency ratings must exceed 0.82 EF.

3-5 hours Gas line fitterPressure gauge

Pro tip: Combine with income-qualified boosts to 75% coverage up to $1,000 if household income is under 80% area median.

4. Drip Irrigation Conversion $500 per Acre

Energy Trust of Oregon pays $500 per acre for growers switching from hand line or traveler systems to drip irrigation, reducing pumping energy by 20-40%.[2] Covers 10-20 acres typically, with total project costs $1,000-$3,000 per acre after rebate. Improves water use efficiency by 30%.

1-2 weeks Irrigation tubingPressure regulators

Pro tip: Add variable frequency drives on pumps for extra rebates up to $1,200 per unit on 2-125 HP motors.

5. Variable Frequency Drives on Irrigation Pumps up to $1,200

Oregon's program increased VFD rebates to $800-$1,200 per drive for 2-125 HP irrigation pumps, covering new or retrofit installs.[2] Cuts energy use by 25-50%, saving $500-$2,000 yearly per pump on 50-acre farms. Base cost $2,000-$5,000 per unit.

1 day MultimeterProgrammable controller

Pro tip: Categorize as retrofit on existing pumps for higher tier; confirm via pre-approval to avoid eligibility denials.

6. EV Charger Alternative Fuel Property Credit up to 30%

Federal credit covers 30% of EV charger install costs up to $1,000 for residential units through June 30, 2026.[4] Level 2 chargers cost $500-$1,500 installed, saving $300-$450 in rebates. Extends to businesses at higher caps.

2-4 hours 200-amp panelEVSE certified charger

Pro tip: Install by Q2 2026 to lock in credit before full phase-out; utility rebates add $200-$500 in most states.

7. New Energy Efficient Home Credit up to $5,000

Builders claim up to $5,000 per qualifying Energy Star or Zero Energy Ready home, available through June 30, 2026.[5] Covers single-family units with 30-50% better efficiency than code, reducing buyer energy bills by $1,000 yearly. Phases out post-deadline.

N/A for buyers Certified builderHERS rater

Pro tip: Buy pre-July 1 to capture full credit; verify Zero Energy Ready for $8,000 max on multifamily.

8. Double-Wall Polycarbonate Greenhouse Covers $0.50 per Sq Ft

Energy Trust offers $0.50 per square foot for double-wall polycarbonate covers on greenhouses, up to $10,000 for 20,000 sq ft structures.[2] Improves insulation, cutting heating costs 20-30% or $2,000-$5,000 annually. Pairs with thermal curtain incentives.

2-3 days Framing kitPolycarbonate panels

Pro tip: Stack with $0.20/sq ft infrared poly for total $0.70 coverage, targeting electric-only heated setups.

9. Income-Qualified Electrical Upgrades up to $1,000

Rhode Island program covers 75% up to $1,000 for purchase and install of electrical upgrades for low-income households under 80% AMI.[1] Includes panel replacements costing $3,000-$5,000, enabling heat pump installs. Saves 15-25% on overall energy bills.

1 day ElectricianPermit

Pro tip: Apply pre-upgrade; no-upgrade tier caps at $500 but avoids contractor delays.

10. Custom Energy Savings Projects up to 90% Coverage

Energy Trust custom incentives pay $0.45/kWh electric or $5/therm gas saved, covering up to 90% of costs for projects like steam traps at $550/unit.[2] Average $10,000 project yields $9,000 rebate with 20-50% energy reduction. Requires pre-approval.

Varies 1-4 weeks Energy model softwareProject engineer

Pro tip: Use free technical support for savings verification; target irrigation or greenhouse combos for max payout.

Bonus Tip

Check Your State's Home Energy Rebates Portal Now

Visit the DOE Home Energy Rebates Portal to locate your locality's program, as states manage 2026 rebates for appliances and efficiency upgrades.[6] Many offer $1,000-$8,000 per home based on income, with 40-60% average savings. Apply within 60 days of install for fastest processing.

What to Avoid

  • Missing pre-approval steps, which disqualifies 30% of custom projects per Energy Trust data—always submit plans first.[2]
  • Overlooking income-qualified tiers, limiting rebates to 50% instead of 75% up to $1,000 for eligible households.[1]
  • Installing post-June 30, 2026, ending EV charger and new home credits abruptly—schedule by Q2.[4][5]
  • Skipping ENERGY STAR verification, voiding 100% of heat pump and water heater rebates across programs.[1][3]