Seasonal Timeline
Spring (March-May)
Pre-season hardening and drainage readiness
-
Inspect and repair roof vulnerabilities
Replace missing shingles, reseal flashing, and inspect attic for leaks. Small roof defects become major failures in wind-driven rain.
-
Clear gutters and extend downspouts
Ensure runoff flows at least 4-6 feet from foundation. Install splash blocks or extensions to prevent basement seepage.
-
Trim trees near structures and lines
Remove dead limbs and maintain safe clearance from rooflines and utility service drops. Prioritize branches over bedrooms and entrances.
-
Seal exterior penetrations
Caulk around windows, doors, vents, and conduit points to reduce water intrusion. Check garage door bottom seals and threshold gaps.
Summer (June-August)
Peak storm operations and rapid-response readiness
-
Stage storm shutters and anchoring hardware
Pre-fit shutters/panels and label by opening to speed installation. Keep fasteners in waterproof, clearly labeled bins.
-
Test sump pump and water alarms
Pour water to verify sump activation and backup battery operation. Install leak alarms in basement, utility rooms, and near water heater.
-
Prepare emergency tarps and patch kit
Store heavy-duty tarps, roofing tape, gloves, and ladder safety gear. Quick temporary covering can prevent thousands in interior damage.
-
Verify generator runtime plan
Calculate critical loads and fuel runtime for 48-72 hours. Rotate fuel stock and test transfer procedure safely.
Fall (September-November)
Post-peak repairs and secondary storm preparedness
-
Document and repair minor storm damage
Address small leaks, siding cracks, and drainage failures before winter systems arrive. Keep dated photos for insurance records.
-
Reinforce doors and garage openings
Install heavier strike plates, longer screws, and garage door bracing where needed. Weak openings are common storm failure points.
-
Inspect grading around foundation
Add soil where settling has created water channels toward the house. Re-establish positive slope away from walls.
-
Update insurance inventory and contacts
Refresh home inventory and verify claim contact process before year-end storms. Store claim numbers and policy documents offline.
Winter (December-February)
Cold-season wind and ice storm protection
-
Prevent ice dam formation
Improve attic airflow and insulation balance, and remove heavy roof-edge snow safely. Ice dams drive water under shingles.
-
Secure outdoor equipment and furniture
Anchor or store items that can become projectiles in winter wind events. Include grills, planters, bins, and holiday structures.
-
Maintain emergency interior dry-down supplies
Keep dehumidifier, fans, and moisture meter ready for rapid response after leaks. Fast drying reduces mold risk and repair costs.
-
Run seasonal claim-readiness check
Review deductible funds, contractor contacts, and temporary housing options. Pre-planning speeds recovery after major damage.
Quick Reference Calendar
| Month | Tasks | Period |
|---|---|---|
| January | 0 tasks | |
| February | 4 tasks | Winter (December-February) |
| March | 4 tasks | Spring (March-May) |
| April | 0 tasks | |
| May | 4 tasks | Spring (March-May) |
| June | 4 tasks | Summer (June-August) |
| July | 0 tasks | |
| August | 4 tasks | Summer (June-August) |
| September | 4 tasks | Fall (September-November) |
| October | 0 tasks | |
| November | 4 tasks | Fall (September-November) |
| December | 4 tasks | Winter (December-February) |
Pro Tips
Label storm protection materials by room/window to reduce install time by more than half when warnings are issued.
Moisture meters are inexpensive and help catch hidden water damage early after storms.
If a leak occurs, take photos before cleanup, during mitigation, and after repairs to simplify insurance claims.