1. How deep is the well, and what type of construction does it have?
Most modern rural wells are drilled 100-400 feet deep for consistent supply and contamination protection, but shallower dug wells under 50 feet risk surface pollutants.[1] Deeper wells cost $25-$50 per foot to drill, averaging $5,000-$15,000 total. Ask for drilling records to confirm casing integrity, which prevents collapse and entry of contaminants.
Pro tip: Prioritize wells over 100 feet deep; they reduce bacterial contamination risk by 70% compared to shallow wells per EPA guidelines.
2. What is the distance between the well and septic system components?
Regulations require 50-75 feet minimum from wells to septic tanks and 100 feet to drain fields for private potable wells, with Florida mandating 75 feet horizontal separation.[2][4] USDA loans enforce 100-foot drain field setbacks, reducible to 75 feet locally. Non-compliant spacing on older properties raises cross-contamination risk by 40-50%.[1]
Pro tip: Measure up-gradient placement; wells upslope from septics cut groundwater pollution risk by 60% per Florida Chapter 62-6 standards.
3. When was the last well inspection and water quality test performed?
Well inspections check casing, seals, pump, and tank, costing $300-$600, and should occur every 1-3 years alongside water tests for bacteria and nitrates ($100-$250).[1][3] 15-25% of rural wells fail initial tests for coliform bacteria. Flow testing verifies 5-10 gallons per minute yield needed for homes.
Pro tip: Demand tests from certified labs; recent negative results for E. coli and nitrates under 10 mg/L confirm safety per Florida DEP rules.
4. What are the ages and maintenance records of the well pump and pressure tank?
Submersible pumps last 15-25 years at $800-$2,000 replacement cost, while pressure tanks endure 10-15 years at $500-$1,200.[1] Unusual cycling signals tank failure, common in 30% of systems over 12 years. Annual maintenance prevents 80% of breakdowns.
Pro tip: Budget $1,500 every 15 years; replace tanks showing waterlogging, which affects 25% of rural systems prematurely.
5. When was the septic tank last inspected and pumped?
EPA recommends inspections every 1-3 years and pumping every 3-5 years, costing $250-$500, based on 1,000-1,500 gallon tank size for 3-bedroom homes.[5] Unpumped systems fail 50% faster, leading to $3,000-$7,000 drain field repairs. Florida requires permits for all work except owner-occupied single-family homes.[6]
Pro tip: Verify 24-inch vertical separation from drain field to water table; mounded systems add $5,000 but suit 20% of high-water-table lots.[4]
6. Does the property have permits for the well and septic installations?
Florida mandates DEP permits for wells and DOH permits for septics, involving soil evaluations and setbacks, with fees of $200-$500 each.[3][6] Unpermitted systems face $1,000-$10,000 fines or demolition on 10-15% of rural sales. Only licensed contractors or homeowners can work on owner-occupied properties.[7]
Pro tip: Cross-check Chapter 62-532 F.A.C. compliance; missing permits void insurance and USDA/FHA loans on 25% of ineligible rural properties.[2]
Bonus Tip
Hire a Professional Inspector Early
Engage a certified well and septic inspector for $500-$1,000 before closing to uncover hidden issues like 100-foot setback violations or pump failures. This catches 70% of problems missed by sellers, saving $10,000+ in post-purchase fixes. USDA loans require it for rural eligibility.
What to Avoid
- Skipping distance verification: 40% of older rural properties have sub-75-foot well-septic spacing, risking contamination and $15,000 remediation.[1][4]
- Ignoring water testing: 20-30% of private wells exceed nitrate limits over 10 mg/L without annual checks, per health department data.[3]
- Overlooking pump/tank ages: Systems over 15 years fail in 30% of cases, costing $2,000-$4,000 unexpectedly.[1]
- Buying without permits: Unpermitted installs lead to $5,000-$20,000 legal fixes and loan denials on 15% of rural deals.[6]