7 Tree Hazard Assessment Steps Before Storm Season (2026 Guide)

1. Identify Potential Targets Around Each Tree

Evaluate areas within a tree's fall zone, such as homes, driveways, or power lines, where failure could cause damage; high-occupancy zones like busy streets raise risk by 50%[4]. Prioritize trees leaning toward structures, as 40% of storm failures hit targets directly[1]. Document with photos to track 20-30% higher risks in urban vs. rural settings[4].

15 minutes per tree NotebookCamera

Pro tip: Rate occupancy on a 1-5 scale: score 5 for streets with cars parked 8+ hours daily to fast-track professional evaluation.

2. Scan for Cracks, Splits, and Leaning Trunks

Inspect trunks and major branches for vertical cracks or splits, which fail in 60+ mph winds 60% more often than intact ones[3]. Note leaning trees over 15 degrees toward buildings, as they uproot 4x faster in storms[2]. V-shaped co-dominant stems split under wind load, causing 25% of mature tree failures[3].

20 minutes Binoculars

Pro tip: Use the 'clock method': imagine trunk as a clock face and mark crack positions at 12, 3, etc., for arborist reports.

3. Check for Dead, Hanging, or Diseased Limbs

Remove dead branches over 2 inches diameter, as they become projectiles in 70% of storm cases, costing $500-$2,000 in cleanup[1][7]. Fungal mushrooms at base signal root decay, weakening anchorage by 50%[2]. Pruning reduces canopy wind load by 30%, preventing breaks[3].

30 minutes Pruning sawLadder

Pro tip: Tap limbs with a mallet; hollow thud indicates 40-60% internal decay, prioritizing removal before storms.

4. Examine Root Zone for Heaving Soil or Exposure

Probe 3-5 feet from trunk for heaving soil or exposed roots, indicating 50% reduced stability in clay soils like Tornado Alley[3]. Root damage from construction doubles uprooting risk during 50+ mph gusts[5]. Exposed roots over 6 inches signal imminent failure in 35% of cases[2].

25 minutes ShovelProbe stick

Pro tip: Measure root flare exposure: if buried >4 inches, aerate soil to improve oxygen flow and cut failure odds by 25%.

5. Assess Canopy Density and Branch Balance

Crowded canopies increase wind resistance by 40%, leading to branch snaps costing $300-$1,500 per incident[1]. Thin dense upper canopies by 20-25% to balance load without stressing the tree[3]. Unbalanced canopies post-pruning fail 3x more in high winds[2].

15 minutes Binoculars

Pro tip: Score canopy on 1-10 density: thin scores >7 to drop wind sail effect, mimicking natural storm resistance.

6. Look for Hidden Decay and Fungal Signs

Soft trunk spots or cavities hide decay affecting 30% of trees over 50 years old, failing unseen in storms[3]. Mushrooms near base indicate root rot, with 60% failure rate in wet seasons[2]. Professional resistograph testing detects 80% of internal issues missed visually, at $150-$400 per tree[3].

45 minutes ScrewdriverMallets

Pro tip: Insert screwdriver 2 inches into suspect bark; easy penetration >1 inch confirms decay needing pro cabling at $500-$1,200.

7. Document Findings and Call Certified Arborist

Photograph defects and note targets; ISA arborists use this for Level 2 assessments costing $200-$500, identifying 90% of risks[2][3]. Annual inspections cut emergency removals ($2,000-$10,000) by 70%[1]. Prioritize top 3 risks for cabling at $800 average[3].

30 minutes SmartphoneNotebook

Pro tip: Email photos to 3 local ISA arborists for quotes; select one with resistograph tools for 95% accurate hidden decay detection.

Bonus Tip

Schedule Pre-Storm Pruning Contracts Now

Lock in arborist pruning at $300-$800 per mature tree before peak demand spikes rates 50%[3]. Target weak attachments to halve projectile risks, with native species enduring 20% better[6]. This proactive step ensures availability when storms hit.

What to Avoid

  • Ignoring trees near power lines: failures cause 25% of outages, risking $5,000+ utility fines and repairs[6].
  • Climbing unstable trees yourself: 40% of DIY injuries occur from hidden cracks, per arborist reports[1].
  • Delaying pro inspection for leaning trees: 60+ mph winds topple them in 70% of cases untreated[3].
  • Over-pruning canopy >30%: weakens structure, increasing future storm failure by 35%[3].