8 Warning Signs of a Termite Infestation (2026)

1. Mud tubes on foundation walls — the signature sign of subterranean termites

Subterranean termites build pencil-width mud tubes (also called shelter tubes) from the soil up your foundation wall to reach wood above grade. These tubes are made of soil, saliva, and feces and protect termites from dehydration and predators as they travel between their underground colony and your home's wood. Check the exterior and interior of your foundation walls, especially in crawl spaces, basements, and around plumbing penetrations. Mud tubes can be found on concrete, block, brick, and even metal surfaces. A single tube indicates an active colony accessing your structure.

Foundation inspection: 15–30 minutes

Pro tip: Break a small section of a mud tube and check back in 2–3 days. If the break is repaired, the infestation is active and the colony is still using that pathway. If the tube stays broken, the colony may have found an alternate route — inspect nearby areas for new tubes.

2. Swarmers or discarded wings near windows and doors

Termite swarmers (winged reproductive adults) emerge in large numbers during warm, humid days in spring and early summer to mate and start new colonies. You may see hundreds of winged insects swarming near windows, doors, or light fixtures — or more commonly, piles of discarded wings on windowsills and near exterior doors. Swarmers shed their wings after landing. Finding discarded wings indoors means a colony is living in or immediately adjacent to your structure. Outdoor swarmers near the foundation suggest a colony in the soil nearby.

Visual inspection: 5 minutes

Pro tip: Termite swarmers and flying ants look similar. The key differences: termite swarmers have straight antennae, a thick waist, and two pairs of equal-length wings. Flying ants have elbowed antennae, a narrow pinched waist, and front wings longer than rear wings. Correct identification determines whether you need a termite company or a general pest service.

3. Hollow-sounding wood when tapped

Termites eat wood from the inside out, leaving a thin outer shell that looks intact. Tapping suspected wood with a screwdriver handle produces a hollow, papery sound instead of the solid thud of undamaged wood. You can also push a screwdriver into the wood surface — if it penetrates easily or the wood crumbles, termites have consumed the interior. Check baseboards, door frames, window sills, and exposed joists in crawl spaces and basements. This test is simple, free, and catches damage that visual inspection alone misses.

10–20 minutes per room

Pro tip: Focus on wood within 18 inches of the floor — subterranean termites access wood from below, so damage is usually worst at the base of walls, door frames, and window trim. Upper portions of the same piece of wood may still sound solid.

4. Blistering or darkened areas on hardwood floors

Subterranean termites feeding on or just below hardwood flooring cause the surface to appear blistered, buckled, or water-damaged. Dark areas or discoloration on hardwood floors can indicate termite feeding beneath the surface. The damage pattern often looks identical to moisture damage, which is why termite damage under floors frequently goes undiagnosed. If you see floor blistering with no plumbing leak or moisture source above, termites should be considered and investigated by a professional.

Visual observation; professional inspection to confirm

Pro tip: Try pressing on the blistered area with your thumb. Termite-damaged flooring often feels spongy and gives under light pressure. Water-damaged flooring is typically swollen and hard. Both need professional assessment, but spongy flooring with no moisture source is strongly suggestive of termite activity.

5. Frass (drywood termite droppings) below wood surfaces

Drywood termites push tiny fecal pellets called frass out of kick-out holes in the wood they are consuming. Frass accumulates in small piles below the holes and looks like fine sand or sawdust. Under magnification, individual pellets are hexagonal (six-sided) with rounded ends — this shape is unique to drywood termites and distinguishes frass from sawdust or other insect debris. If you find frass piles on windowsills, below ceiling joists, or near furniture legs, drywood termites are actively feeding in the wood above.

Visual inspection: 5–10 minutes

Pro tip: Sweep up the frass pile, place a white paper below the area, and check back in 1 week. New frass accumulating on the paper confirms active feeding. No new frass may mean the colony in that spot has been consumed and moved on — but always have a professional inspect to be sure.

6. Tight-fitting doors and hard-to-open windows

As termites consume wood inside door frames and window frames, the remaining wood absorbs moisture from the termites' mud and redistributes stress unevenly. This causes frames to warp, making doors stick in their frames and windows difficult to open or close. While sticking doors and windows have many causes (foundation settling, humidity changes, paint buildup), this symptom combined with any other sign on this list should trigger a professional termite inspection. Termite-related warping typically worsens progressively rather than coming and going with seasons.

Observation during normal use

Pro tip: If a door that previously opened freely now sticks and you also notice fine cracks in the drywall above the door frame, termites may have weakened the header above. The header sags, the frame shifts, and both the door and the surrounding drywall show stress. This combination warrants immediate inspection.

7. Bubbling or peeling paint that looks like water damage

Termites feeding behind painted surfaces create moisture from their activity and tunneling. This moisture causes paint to bubble, peel, or flake in areas where there is no exterior water source. The paint may also appear warped or uneven. This is most commonly seen on exterior trim, fascia, and siding where subterranean termites have built mud tubes behind the cladding. Interior paint bubbling along baseboards is another indicator. If paint is peeling on a surface that has no exposure to rain or plumbing, investigate for termites before repainting.

Visual observation during exterior maintenance

Pro tip: Before repainting exterior trim, probe the wood with a screwdriver. If the wood is soft, spongy, or hollow, termites may be the cause of the paint failure. Repainting over termite-damaged wood hides the problem and delays treatment while damage continues.

8. Maze-like patterns in exposed wood

When you remove damaged drywall, paneling, or flooring and expose the wood framing behind it, termite-damaged wood shows distinctive gallery patterns: parallel channels running along the wood grain, packed with dried mud (subterranean termites) or smooth and clean (drywood termites). These galleries weaken the structural integrity of the wood member. If you see this pattern during any renovation or repair project, stop work and schedule a termite inspection before proceeding. The extent of damage behind walls is almost always larger than what is visible at the opening.

Observation during renovation or repair

Pro tip: Document gallery patterns with photos before any repair work covers them. A pest professional can identify the termite species from the gallery pattern and determine whether the infestation is active or historic. This affects treatment scope and cost significantly.

Bonus Tip

Schedule a professional termite inspection annually — even with no visible signs

Termite colonies work silently for 3–5 years before visible signs appear in living spaces. An annual inspection by a licensed termite professional ($75–$150, often free from companies seeking your business) catches activity in crawl spaces, attics, and behind walls where homeowners cannot easily see. Catching termites in year one of activity versus year five can mean the difference between a $1,500 treatment and a $10,000 treatment-plus-structural-repair.

What to Avoid

  • Ignoring swarmers as 'just flying ants' — swarming termites inside your home indicate a mature colony in or immediately adjacent to the structure. This requires professional treatment, not a can of bug spray.
  • Disturbing or spraying mud tubes with pesticide before a professional inspection — the technician needs to see the tubes to assess the scope of the infestation. Spraying them causes termites to reroute through new tubes you may not find.
  • Assuming termites will 'go away on their own' — termite colonies do not leave voluntarily. Without treatment, they continue consuming wood until the food source is exhausted or the structure fails.
  • Relying on a general home inspection to detect termites — standard home inspections are not termite inspections. Most home inspection contracts explicitly disclaim termite assessment. A dedicated WDI (Wood-Destroying Insect) inspection is a separate service.