1. Subterranean Termites — the most costly structural pest in the U.S.
Subterranean termites cause an estimated $5 billion in property damage annually in the United States. A mature colony of 60,000–1,000,000 workers eats 2–16 pounds of wood per year, weakening floor joists, wall studs, and headers over time. Damage is hidden inside intact-looking wood — by the time you see sagging floors, sticking doors, or crumbling baseboards, the structural members behind the wall may already need replacement. Treatment costs $1,200–$3,500. Structural repair from advanced damage averages $3,000–$8,000 and can reach $15,000+ for foundation-level framing replacement.
Pro tip: Tap exposed wood in your crawl space or basement with a screwdriver handle. Termite-damaged wood sounds hollow and the screwdriver pushes through easily. Solid wood sounds dense and resists penetration. Do this check annually.
2. Drywood Termites — they live inside the wood they eat
Unlike subterranean termites that travel from soil colonies, drywood termites live entirely within the wood they consume. They infest roof framing, wall studs, hardwood floors, and even furniture. The most recognizable sign is small piles of hexagonal fecal pellets (frass) pushed out of tiny kick-out holes in the wood surface. Colonies are smaller (1,000–2,500 workers) but multiple colonies often infest the same structure. Localized treatment costs $500–$1,500 per area. Whole-structure fumigation for widespread infestations costs $2,000–$5,000. They are most common in coastal Southern California, Florida, Hawaii, and the Gulf Coast.
Pro tip: If you find small piles of what looks like sand or sawdust under wooden surfaces, collect a sample and show it to a pest professional. Drywood termite frass has a distinctive hexagonal shape visible under magnification — it is the most reliable diagnostic sign.
3. Carpenter Ants — they don't eat wood, but they hollow it out for nesting
Carpenter ants excavate galleries in wood to build their nests, ejecting fine sawdust (frass) mixed with insect body parts. They prefer wood that is already softened by moisture damage — window frames, deck ledger boards, fascia, and structural members around plumbing leaks. A mature colony of 3,000–10,000 workers can weaken a joist or header over 2–3 years. Treatment costs $250–$500 for localized wall-void injection. Structural repair for advanced damage runs $1,000–$5,000. The key differentiator from termites: carpenter ant galleries are smooth and clean inside, while termite galleries are rough and packed with mud.
Pro tip: Carpenter ants are most active at night. If you suspect an infestation, watch baseboards and window frames with a flashlight after 10 PM. Follow trailing ants back to their entry point — this tells the technician exactly where to treat.
4. Powderpost Beetles — they reduce hardwood to fine powder
Powderpost beetles (Lyctus, Anobiid, and Bostrichid species) lay eggs in the pores of hardwood. Larvae bore through the wood for 1–5 years, consuming it from the inside. The first visible sign is tiny round exit holes (1/32 to 1/8 inch) in hardwood floors, cabinets, furniture, or exposed framing, accompanied by fine powder spilling from the holes. Severe infestations can reduce a hardwood board to a shell of powder held together by paint or varnish. Treatment ranges from localized borate application ($300–$800) to fumigation ($2,000–$5,000) for whole-structure infestations.
Pro tip: Place a piece of white paper under suspected exit holes and check it weekly. Fresh powder accumulating on the paper means the infestation is active and larvae are still inside the wood. Old exit holes without fresh powder may indicate a past infestation that has already run its course.
5. Rodents (Mice and Rats) — they chew wiring, plumbing, and structural insulation
Rodents cause structural damage by gnawing through electrical wiring (creating fire hazards), PEX and PVC plumbing lines (causing leaks), and insulation (reducing its R-value). They also contaminate attic insulation with urine and droppings, often requiring full insulation replacement at $1,500–$4,000 for an average attic. Rats have been implicated in an estimated 20–25% of undetermined house fires due to wire gnawing. Rodent exclusion and removal costs $300–$1,500. Damage repair — rewiring, replumbing, insulation replacement — can cost $2,000–$10,000 depending on extent.
Pro tip: After a rodent infestation is resolved, have an electrician inspect wiring in the attic and crawl space — especially in the 3 feet closest to rodent nesting sites. Gnawed wire insulation inside wall cavities is an ongoing fire risk that is invisible from the living space.
6. Carpenter Bees — they bore into fascia, deck rails, and exterior trim
Carpenter bees bore perfectly round 1/2-inch holes into untreated softwood — fascia boards, deck railings, pergola beams, and wooden siding. Each female excavates a tunnel 6–10 inches deep and lays eggs inside. The bees return to the same wood year after year, extending existing tunnels and boring new ones. Over 5–10 years, heavily infested fascia boards become structurally weak and need replacement. Woodpeckers often enlarge the holes to reach larvae, causing additional damage. Treatment costs $150–$300 per visit. Wood replacement for heavily damaged fascia runs $500–$2,000.
Pro tip: Paint or stain all exterior softwood surfaces. Carpenter bees strongly prefer bare, untreated wood. A painted or stained surface reduces boring attempts by 80–90%. Pay special attention to the underside of fascia boards and the end grain of deck rails — these are the most targeted surfaces.
7. Squirrels and Raccoons — they tear through roofing, soffits, and attic framing
Wildlife entering attics causes rapid structural damage. Squirrels gnaw through soffit vents, fascia, and even roof decking to create access holes. Raccoons tear off soffit panels, bend gutter aprons, and rip through roof sheathing with raw strength. Once inside, both species damage insulation, chew wiring, and contaminate the attic with urine and feces. Raccoon latrines in attics pose a serious health risk (raccoon roundworm). Wildlife removal costs $300–$800. Exclusion repairs (replacing soffits, screening vents, patching roofing) run $500–$2,500. Insulation replacement adds $1,500–$4,000.
Pro tip: Never seal an entry point until you confirm all animals are out. Sealing a mother raccoon or squirrel inside your attic causes far more damage — the animal will tear through drywall, ductwork, and wiring trying to escape or reach trapped young.
Bonus Tip
Annual pest inspections prevent small problems from becoming structural failures
A professional pest inspection ($75–$200) once a year catches wood-destroying insects and wildlife damage when it is localized and affordable to treat. The average cost to treat an early-stage termite problem is $1,500–$2,500. The average cost to treat and repair an advanced termite infestation with structural damage is $8,000–$15,000. The inspection pays for itself many times over by catching damage in its first year instead of its fifth.
What to Avoid
- Ignoring small piles of sawdust or frass near wooden surfaces — these are the earliest warning signs of wood-destroying insects and indicate active boring or excavation inside the wood.
- Filling carpenter bee holes or termite exit holes without treating the infestation — sealing the outside traps the pests inside and hides the damage without solving the problem.
- Using DIY foggers or sprays for wood-destroying insect infestations — surface treatments do not reach insects living deep inside structural wood. Professional injection, bait, or fumigation is required.
- Delaying wildlife removal because the animal 'will leave on its own' — raccoons and squirrels cause progressive damage daily. A week of delay can mean the difference between a $200 repair and a $2,000 one.