1. Verify All Agreed-Upon Repairs Were Completed Properly
Request proof of repairs—receipts or invoices from contractors—for any negotiated fixes like HVAC repairs (averaging $300-$1,200), roof leaks, plumbing issues, or appliance replacements. Test each repaired item yourself to confirm it's functioning correctly. If repairs haven't been completed, you can negotiate for the seller to finish the work before closing or provide a credit for you to handle it later.
Pro tip: Ask the seller to provide timestamped photos of completed repairs taken within 48 hours of closing, not just receipts. This prevents disputes over whether work was actually finished to professional standards.
2. Test All Major Systems and Utilities
Confirm utilities remain on during the walkthrough, then test heating, air conditioning, water heater, and electrical systems. Turn on lights and check outlets with your phone charger, run faucets and toilets to check for leaks, and verify hot water works. A non-functional HVAC system can cost $5,000-$10,000 to replace, making this verification critical before closing.
Pro tip: Take a video recording (not just photos) of each system test—turning on lights, running water, adjusting thermostats. This creates undeniable documentation if disputes arise after closing about when systems failed.
3. Inspect Floors, Walls, and Ceilings for New Damage
Walk room by room looking for scratches on hardwood floors, gouges in drywall, stains on ceilings, or carpet burns that may have appeared during the seller's move-out. Check hardwood for soft spots or warping indicating water damage, inspect tile for cracks or missing grout, and ensure carpets are clean. New damage discovered here can justify a credit at closing or escrow holdback to cover repair costs ($150-$500 per area).
Pro tip: Use your phone's flashlight at a low angle across floors to reveal scratches and damage that overhead lighting might miss. Photograph any issues from multiple angles with clear timestamps.
4. Confirm Windows, Doors, and All Keys/Remotes Are Included
Physically open and close every window and door to confirm frames aren't stuck and thermal seals haven't failed (fogging between panes indicates seal failure, costing $300-$1,000 per window to replace). Test all locks, ensure the seller provided the full set of keys and deadbolt keys, and verify garage door sensors reverse properly with all remotes accounted for. Smart home devices like Ring doorbells should be factory reset and transferred to your account.
Pro tip: Create a numbered inventory of every key and remote as you test them, then photograph the list. Sellers sometimes claim keys were provided when they weren't—this documentation prevents post-closing disputes.
5. Check Kitchen Appliances Match the Contract and Function
Verify every appliance listed in your purchase agreement is present and matches the brand and model numbers specified. Test the refrigerator, oven, dishwasher, microwave, and garbage disposal to confirm they operate correctly. If the seller agreed to replace a refrigerator (average cost $1,200-$2,500) or dishwasher (average $600-$1,200), confirm the new model matches what was promised.
Pro tip: Take photos of the serial numbers and model numbers on each appliance, then cross-reference them against your purchase agreement. Many disputes arise from sellers leaving similar but different models than agreed.
6. Test Bathroom Fixtures and Check for Water Damage or Mold
Turn on all faucets and check for leaks, run showers and tubs to verify water pressure, and flush toilets to confirm they don't run constantly. Inspect under sinks for water stains or soft cabinet material indicating previous leaks. Look for mold or mildew in corners, around windows, or in ventilation areas—mold remediation can cost $2,000-$6,000 depending on severity. Check that mirrors and wall-mounted hardware are secure and present.
Pro tip: Use your phone camera in video mode to record water pressure and drainage—this proves systems were functional at walkthrough time. Photograph any discoloration or soft spots with zoom to capture detail.
7. Verify the Home is 'Broom Clean' and Fully Emptied
The contractual standard for closing is 'broom clean,' meaning floors are swept, cabinets are emptied, and the home is ready for immediate occupancy. Check that the garage and basement are free of old paint cans, tires, construction debris, and leftover items. If the property falls short of this standard, your lawyer may arrange a holdback of funds (typically 1-3% of purchase price) to cover cleanup costs.
Pro tip: Take photos of every closet, cabinet, garage shelf, and basement corner—empty spaces photograph as proof. If you find items left behind, photograph them with the room context so there's no dispute about ownership.
8. Inspect Exterior for New Damage to Roof, Siding, and Masonry
Walk the exterior perimeter looking for new damage to roofing, siding, brick, or masonry that may have occurred since your last viewing. Check that gutters are intact and downspouts are secure. Look for missing shingles (roof repairs average $300-$1,000) or cracks in foundation or exterior walls. Use binoculars to inspect roof condition from the ground if safe to do so.
Pro tip: Compare exterior photos from your initial home inspection to your final walkthrough photos. Any new damage that appeared between inspections is the seller's responsibility to fix before closing.
9. Confirm Included Fixtures and Outdoor Structures Are Present
Your purchase agreement lists exactly what stays with the home—kitchen appliances, washer/dryer units, window treatments, light fixtures, built-in shelving, and outdoor structures like storage sheds or play equipment. Walk through systematically confirming every listed item is present and in good condition. Light fixtures alone can total $1,500-$3,000 if the seller removes them without authorization.
Pro tip: Create a checklist from your purchase agreement and physically check off each item as you verify it's present. Take photos of expensive fixtures like chandeliers or built-in shelving to prove they were there at closing.
10. Document All Issues with Timestamped Photos and Notify Your Agent Immediately
If you find any deficiencies—a hole in the wall, incomplete repairs, missing items, or systems not working—document everything with timestamped photography before you leave the property. Notify your real estate agent and attorney immediately with photos and descriptions. This documentation determines whether you can negotiate for a credit at closing, escrow holdback funds, or delayed closing until problems are resolved.
Pro tip: Send photos and a written summary to your agent via email immediately after the walkthrough while you're still on the property. This creates a timestamped record and prevents 'he said, she said' disputes about what condition the home was in.
Bonus Tip
Schedule Your Walkthrough 24-48 Hours Before Closing
Timing matters—visiting too early means new damage can appear before closing, while visiting too late leaves no time to resolve issues. Schedule your final walkthrough 24 to 48 hours before your closing documents are signed. This window ensures the home's condition is accurately represented just before title transfer, giving you maximum leverage to negotiate solutions if problems are discovered.
What to Avoid
- Skipping the walkthrough entirely or treating it as a formality. The moment you close, the seller's obligations end and you lose all leverage. This is your final layer of protection and costs nothing but time.
- Forgetting to bring essential documents like your purchase agreement, inspection report, repair addendum, and seller receipts. Without these, you can't verify what was promised or confirm repairs were completed to specification.
- Failing to test systems and fixtures because utilities are off. If you can't turn on lights, run water, or test HVAC, you won't discover broken systems until after closing when repairs become your responsibility—costing thousands in unexpected expenses.
- Neglecting to photograph or document issues you discover. Without timestamped photos and written notification to your agent, you have no proof of deficiencies and no basis to negotiate credits or holdbacks before closing.