1. Visible Pipes and Water Supply Lines
Plumbers inspect all accessible water supply pipes for signs of corrosion, leaks, or damage. They check both visible pipes under sinks and in basements, looking for water stains, discoloration, or mineral buildup that indicates deterioration. Corroded pipes can cost $3,000-$25,000 to replace depending on the extent, making early detection critical. Water damage from hidden leaks can add another $2,000-$10,000 in structural repairs.
Pro tip: Ask the plumber to check pipes under all sinks and in crawl spaces, as these areas accumulate moisture and show corrosion patterns first. Request photos of any discolored sections for your records.
2. Water Pressure Testing on All Floors
Inspectors test water pressure at multiple locations using a gauge that screws onto hose bibs or washing machine connections. Healthy water pressure should read between 40-80 PSI; readings below 40 PSI indicate potential leaks that may require epoxy pipe lining ($1,500-$3,000), while pressure above 80 PSI suggests a faulty pressure regulator ($300-$500 replacement). Low pressure can also signal mineral buildup reducing flow by 20-30%.
Pro tip: Request pressure readings from at least three different locations (kitchen, bathroom, basement) to identify if the issue is localized or system-wide, which affects repair costs significantly.
3. Faucets and Fixtures for Leaks and Wear
Plumbers turn on every faucet, shower, and toilet to check for leaks, drips, and proper operation. A single dripping faucet can waste up to 3,000 gallons annually, adding $35-$50 to yearly water bills. Worn washers cost $10-$30 to replace, but if ignored, internal corrosion can require full fixture replacement at $150-$500 per unit.
Pro tip: Have the inspector check aerators on faucets, as mineral buildup here is often mistaken for low pressure—cleaning costs $0-$15 versus $500+ for unnecessary pressure regulator replacement.
4. Drain Systems and Ventilation
Plumbers inspect drains for slow drainage, gurgling sounds, or foul odors indicating clogs or ventilation issues. They watch water flow from all fixtures and may use a camera inspection ($300-$500) to detect blockages or tree root intrusion in sewer lines. Hydro-jetting to clear severe clogs costs $400-$800, while sewer line replacement can reach $25,000+.
Pro tip: Request a sewer scope inspection if the home is over 40 years old or has large trees nearby; this additional $300-$500 investment can prevent $15,000-$25,000 in emergency sewer repairs within 2-3 years.
5. Water Heater Age and Condition
Inspectors check the water heater's age by examining the serial number and testing temperature output and pressure relief valves. Water heaters last 8-12 years; those older than 10 years typically need replacement costing $1,200-$3,000 for tank models or $2,500-$4,500 for tankless units. Flushing a well-maintained unit costs $150-$300 and extends lifespan by 1-2 years.
Pro tip: Budget for water heater replacement within 1-2 years if the unit is 8+ years old; negotiating this into the purchase price saves 10-15% compared to emergency replacement after purchase.
6. Water Meter and Hidden Leak Detection
Plumbers check the water meter for movement when no water is running, indicating hidden leaks. They compare usage patterns month-to-month; an unexplained 20-30% increase suggests a leak. Hidden leaks can cost $2,000-$10,000 in water damage and add $50-$200 monthly to water bills before detection.
Pro tip: Request a copy of the previous 12 months of water bills to establish baseline usage; this data helps identify if current readings are abnormal and whether leaks existed before your inspection.
7. Shut-Off Valves and Water Control Systems
Inspectors locate and test the main water shut-off valve plus individual shut-off valves on supply lines. A faulty or inaccessible main valve means you cannot stop water flow during emergencies, potentially causing $5,000-$50,000 in damage. Testing each valve ensures they operate smoothly; stuck valves cost $150-$400 to repair or replace.
Pro tip: Ask the inspector to show you the main shut-off location and confirm it operates smoothly; if stuck, budget $200-$300 for replacement before closing to avoid emergency costs during your first year.
8. Signs of Water Damage and Mold Growth
Plumbers inspect walls, ceilings, and floors for dark spots, discoloration, warping, or unexplained wet areas indicating hidden leaks. Water damage remediation costs $2,000-$10,000 depending on extent, while mold treatment adds $2,000-$6,000. Early detection prevents structural damage that can reduce home value by 10-25%.
Pro tip: Pay special attention to areas under sinks, around toilets, and basement corners where moisture accumulates; request moisture meter readings in suspicious areas to document baseline conditions for future reference.
Bonus Tip
Schedule a Sewer Scope Inspection for Comprehensive Protection
While standard plumbing inspections focus on visible systems, a camera-based sewer scope inspection ($300-$500) reveals clogs, tree root intrusion, and structural damage in underground sewer lines that could cost $15,000-$25,000 to repair. This inspection is especially critical for homes built before 1980 or those with mature trees on the property. Including this service during your initial inspection gives you negotiating power and prevents surprise failures within your first year of ownership.
What to Avoid
- Skipping the water pressure test—low or high pressure indicates different problems with different costs; assuming all pressure issues cost the same can lead to unnecessary $500+ regulator replacements when a $30 aerator cleaning solves the problem.
- Ignoring drain gurgling sounds—these indicate ventilation issues or early clogs that cost $400-$800 to clear now but can escalate to $25,000+ sewer line replacement if tree roots penetrate the line.
- Assuming water heaters last 15+ years—most tank heaters fail between 8-12 years; replacing a failed unit as an emergency costs 15-25% more than planned replacement and may cause temporary water damage.
- Neglecting to test shut-off valves—a stuck main valve during a pipe burst means uncontrolled water damage; testing costs nothing but prevents $5,000-$50,000 in emergency repairs.