1. Doors and Windows That Suddenly Stick or Won't Close
When termites eat through framing lumber around door and window openings, the structural members warp and shift. A door that closed perfectly last year but now drags or gaps at the top corner often indicates termites have hollowed out the jack studs or header. This is especially concerning if the sticking worsened over just a few months rather than gradually over years. Do not assume it is just settling — push a screwdriver into the frame near the sticking point and see if the wood feels soft or hollow.
Pro tip: If the screwdriver sinks more than 1/4 inch into the wood with light hand pressure, the timber has lost significant structural integrity and needs professional inspection within days, not weeks.
2. Bubbling or Peeling Paint on Interior Walls
Termites feeding behind drywall create moisture from their body processes and mud tubes. This moisture migrates through the wall, causing paint to bubble, peel, or develop dark water-stain patterns with no plumbing leak above. Many homeowners repaint and move on, not realizing that behind the fresh coat, termites are consuming the wall studs. If paint bubbling coincides with any other sign on this list, treat it as a red flag for active infestation.
Pro tip: Tap the wall with your knuckle in the bubbling area — a hollow or papery sound compared to surrounding solid areas confirms the drywall backing or studs have been consumed.
3. Sagging or Buckling Floors
Subterranean termites attack floor joists, subflooring, and sill plates from below. When enough material is consumed, floors begin to sag, feel spongy underfoot, or buckle visibly. A single floor joist replacement costs $200–$500, but if multiple joists are damaged the repair can exceed $5,000–$10,000. Walk every room slowly and pay attention to any springiness or unevenness, especially near exterior walls where termites typically enter.
Pro tip: Place a marble or golf ball on a suspected area — if it rolls consistently to one spot, that section has likely dropped, indicating joist damage beneath.
4. Mud Tubes Extending Beyond the Foundation
Mud tubes on your foundation wall mean subterranean termites are present, but tubes that extend across concrete slabs, up interior walls, or along plumbing pipes indicate the colony has expanded well past the initial entry point. A mature colony consumes roughly 5 pounds of wood per year, and tube networks spreading to new areas mean multiple feeding sites are active simultaneously. Document every tube location with photos and measurements for your pest control provider.
Pro tip: An active tube that is rebuilt within 2–3 days after you break it open confirms a vigorous, established colony — not a minor incursion.
How to do it:
- Walk the entire foundation perimeter, checking for pencil-width mud tubes on concrete, block, or stone.
- Inspect the basement or crawl space walls, piers, and plumbing penetrations.
- Break open one tube in the middle — if live termites are visible inside, the tube is active.
- Photograph each tube location with a ruler for scale.
5. Hollow-Sounding Wood When Tapped
Termites eat wood from the inside out, leaving a thin veneer of surface wood or paint. Tapping structural timbers — especially baseboards, window sills, door frames, and exposed beams — with a screwdriver handle reveals hollow sections that should be solid. Sound wood produces a firm, solid thud; damaged wood sounds papery or hollow. If more than one area sounds hollow, the colony has been active for a year or more.
Pro tip: Focus on wood within 18 inches of the ground — subterranean termites rarely travel more than a few feet above their soil entry point unless the colony is very large.
6. Piles of Frass Near Baseboards or Window Sills
Drywood termites push tiny hexagonal pellets (frass) out of kick-out holes as they excavate galleries. These pellets look like fine sawdust or coffee grounds and accumulate in small piles below the infested wood. Unlike subterranean termites that need soil contact, drywood termites live entirely inside the wood — so frass piles mean the colony is directly above or behind that spot. A single kick-out hole can produce a new pile within 24–48 hours of cleaning.
Pro tip: Collect a small sample in a plastic bag — a pest inspector can confirm termite frass versus carpenter ant debris or wood-boring beetle dust under magnification, which changes the treatment approach entirely.
7. Visible Damage to Structural Beams in the Crawl Space
If you can see channels, galleries, or crumbling sections on floor joists, sill plates, or support beams in your crawl space, the damage is already advanced. Termite galleries follow the grain of the wood and are often packed with soil or mud. A structurally compromised sill plate repair averages $2,000–$4,500, and if the damage extends to load-bearing posts or beams, costs can reach $7,000–$15,000 with temporary jacking and sistering.
Pro tip: If a screwdriver probe reveals more than 2 inches of soft or missing wood in a structural beam, do not delay — call a structural engineer along with the pest company, as the home may need temporary supports before treatment.
How to do it:
- Enter the crawl space with proper lighting and protective gear.
- Probe the sill plate (where framing meets the foundation) with a screwdriver every 2–3 feet.
- Check the bottom edge of floor joists nearest to exterior walls.
- Look for mud tubes on foundation piers and support columns.
- Document damage with photos showing the depth and extent.
8. Swarmers Appearing Indoors Year After Year
Seeing winged termites (swarmers) inside your home once could be a minor event, but swarmers appearing indoors in consecutive years means a mature colony is living inside your structure. Colonies need 3–5 years of growth before they produce swarmers, so indoor swarms indicate thousands of workers have been feeding on your home's wood that entire time. Collect several swarmers in a jar for identification — they are often confused with flying ants.
Pro tip: Termite swarmers have straight antennae, equal-length wings, and a thick waist — flying ants have elbowed antennae, unequal wings, and a pinched waist. Correct ID determines whether you need a termite specialist or a general pest service.
Bonus Tip
Get a WDI (Wood-Destroying Insect) Report, Not Just a Verbal Inspection
A formal WDI report is a standardized document that details the type of termite, location of damage, and severity — and it creates a legal record. Verbal-only inspections leave you with no documentation if you later discover the problem was understated. Most pest companies charge $75–$150 for a written WDI report, and it is money well spent if you ever need to file an insurance claim or disclose the issue during a home sale.
What to Avoid
- Spraying retail termite killer on visible mud tubes and assuming the problem is solved — surface sprays only kill the few workers you can see, while thousands remain hidden in the colony.
- Delaying a professional inspection because you only see one sign — termite damage is cumulative, and a single sign often means months or years of hidden activity.
- Relying solely on bait stations without monitoring them quarterly — unmaintained bait stations become useless decorations while termites continue feeding nearby.
- Assuming a concrete slab foundation protects you from termites — subterranean termites enter through cracks as narrow as 1/32 inch in concrete slabs and expansion joints.