1. 40 Grit for Rapid Material Removal on Rough Wood or Rust
Use 40 grit, an extra-coarse option, to strip heavy paint, rust, or shape unfinished wood, removing up to 1/16 inch per pass[1][6]. Packs cost $5-8 for 5 sheets (9x11 inches), ideal for floor refinishing or initial metal prep where coarser 24 grit risks gouging[2][6]. It fits 40-60 particles per square inch, enabling 50% faster stock removal than 80 grit[1][5].
Pro tip: Pair with a random orbital sander at 2000 RPM to avoid swirl marks, reducing rework by 70% on curved surfaces[3].
2. 60 Grit to Smooth Initial Shaping and Heavy Imperfections
60 grit coarse sandpaper shapes wood or metal, blending seams after 40 grit and removing old finishes at 0.02-0.04 inches per minute[1][3]. Expect $4-7 per 5-pack, used for rough lumber where it cuts sanding passes by 30% versus finer starts[6]. Particle size allows 60 abrasives per square cm, perfect for joint compound smoothing[7][8].
Pro tip: Sand with the grain using light 5-10 lb pressure to prevent 80% of deep scratches, especially on oak or pine[1].
3. 80 Grit for Stripping Paint and Rounding Edges
80 grit medium-coarse strips paint and rounds sharp corners, transitioning from rough sanding with 0.015-inch removal rate[1][6]. 5-sheet packs run $3-6 USD, standard for woodworking starts where it preps 90% of surfaces for staining without tear-out[3]. Use after 60 grit to eliminate 95% of coarse marks[1].
Pro tip: Fold sheets into thirds for edges, achieving 2x faster feathering than full sheets on furniture legs[2].
4. 120 Grit to Prep Surfaces for Paint or Stain
120 grit medium smooths after coarse stages, removing 80 grit scratches for even paint absorption, with packs at $4-9 for 5 sheets[1][2]. Ideal for drywall joints or wood prep, reducing finish defects by 60%[2][3]. It balances speed and control, handling 100-150 grit equivalents in FEPA standards[4].
Pro tip: Progress in 1.5x grit jumps (80 to 120) to halve visible scratches under 100x magnification[1][3].
5. 150 Grit for General Smoothing and Texture Control
150 grit fine grade smooths for painting, adding light texture without splinters, costing $5-10 per 5-pack[2][6]. Safest general-purpose choice for 70% of home projects like cabinets, blending textures 40% faster than 220[2]. Particle diameter hits 25-40 micrometers for even finishes[4].
Pro tip: Use on drywall seams to level 0.005-inch joints, preventing 85% of bubbles in latex paint[2].
6. 220 Grit to Final Prep Before Finishing Coats
220 grit very-fine preps for stain or clear coats, scuffing glossy surfaces with minimal 0.005-inch removal[1][6]. Packs cost $6-12 USD, essential for 80% of woodworking ends where it ensures 98% scratch-free under light[1][3]. Standard progression cap for most projects[1].
Pro tip: Sand lightly at 1200 RPM to raise grain 20% less, improving stain penetration by 50% on hardwoods[3].
7. 400 Grit for Polishing Between Finish Coats
400 grit super-fine polishes wood or metal between coats, with 15-25 micrometer particles for high shine, $7-12 per 5-pack[4][6]. Removes 95% of 220 grit marks, used wet for 30% smoother auto clear coats[6]. Vital for cabinets needing mirror finishes[4].
Pro tip: Wet sand with 10% soap solution to cut dust by 90% and achieve 2000-grit equivalent smoothness[4][6].
Bonus Tip
Always Progress Grits by 50-100% Increments
Start coarse and step up (e.g., 80→120→220) to eliminate 100% of prior scratches, saving 40% total time versus random use[1][3]. This method works on 95% of projects from furniture to metalwork. Track with a grit chart for consistent pro results under $50 investment.
What to Avoid
- Skipping grit progression: Jumping from 60 to 220 leaves 70% visible scratches under finish, requiring full resand[1][3].
- Sanding across the grain: Creates 80% more swirl marks, doubling repaint needs on wood surfaces[2].
- Ignoring dust extraction: Inhaling 50% more particles without a vac-mask combo risks health and clogs tools[3].
- Over-sanding fine grits: Removes 2x material unnecessarily, weakening wood by 15% before staining[6].