10 Router Bit Types and Common Woodworking Uses (2026 Guide)

1. Straight Router Bits Cut Grooves and Dados

Straight bits create grooves, dados, rabbets, and mortises essential for 70% of joinery tasks[1][2]. Available in diameters from 1/8" to 2", they cost $10-$30 USD for 1/4" shank models[5]. Two-flute designs clear chips efficiently, reducing heat buildup by 20% over single-flute[4].

routertable or guide

Pro tip: Use 1/2" shank bits in full-size routers for 40% less vibration than 1/4" shanks on cuts over 1" deep[4][5].

2. Flush Trim Bits Follow Templates Precisely

Flush trim bits with bearings trim edges flush to templates or laminates, ideal for veneer work[1][5]. Sizes range 1/4"-1" diameter at $15-$35 USD[2]. They save 50% time over hand planing by following contours accurately[7].

templaterouter

Pro tip: Reverse the bit rotation for top-mounted bearings to cut 15% cleaner on plywood edges without tearout[1].

3. Chamfer Bits Bevel Edges at 45 Degrees

Chamfer bits cut 45-degree bevels on tabletops and shelves, with angles from 11.25-45 degrees[1][2]. Common 1/2" models cost $12-$25 USD and include bearings for guided cuts[5]. They reduce sharp edge injuries by easing 1/16"-1/2" widths[2].

routeredge guide

Pro tip: Test at router speed 18,000-22,000 RPM to avoid burning, which occurs 30% less with sharp carbide tips[2].

4. Roundover Bits Soften Sharp Corners

Roundover bits create 1/4"-1/2" radii on edges for safer furniture, costing $15-$30 USD[2][6]. They produce convex profiles matching 80% of cabinet designs[3]. Adjustable bearings allow 25% more profile variations per bit[7].

routerworkbench

Pro tip: Pair with 1/8" radius for beading; smaller bearings add shoulders, increasing detail options by 50%[3].

5. Cove Bits Form Concave Moldings

Cove bits cut quarter-circle concave edges for table aprons, priced $20-$40 USD in 1/4"-1" radii[2][7]. Often paired as cove-and-bead for 60% of period furniture profiles[2]. They match drop-leaf table edges precisely[2].

router tablefeatherboard

Pro tip: Combine with roundover for ogee-like profiles, saving $50 on specialty bits[6].

6. Rabbeting Bits Create Flat Shoulders

Rabbeting bits cut shoulders for cabinet joints, with adjustable depths up to 1/2" at $18-$35 USD[5]. They form flat rabbets 2x stronger than dadoes in plywood[5]. Bearing guides ensure 1/32" accuracy[7].

routerstraight edge

Pro tip: Set depth in 1/16" increments for tongue-and-groove fits, improving joint strength by 25%[5].

7. V-Groove Bits Carve Sign Lettering

V-groove bits cut 60-90 degree channels for signs and miters, costing $12-$28 USD in 1/4"-3/4" sizes[3][5]. They enable precise 1/16" deep lettering 40% faster than chisels[3]. Ideal for door panels too[5].

CNC or templaterouter

Pro tip: Use 90-degree for deep V's; sharpens to 0.005" edge hold 3x longer life[3].

8. Spiral Bits Reduce Tearout in Plywood

Spiral bits with upcut/downcut flutes clear chips better, costing $25-$50 USD for 1/4" shank[1][4]. Downcut versions cut clean top edges 50% better on laminates[4]. Available in compression style for zero tearout[4].

plunge routerdust collection

Pro tip: Match flute count to material: 2-flute for softwoods saves 20% power draw[4].

9. Dovetail Bits Lock Drawers Securely

Dovetail bits cut 7-14 degree interlocking joints for drawers, priced $20-$45 USD in 1/4"-1/2" sizes[3]. They create 3x stronger hold than butt joints in hardwoods[3]. Angles match 90% of furniture standards[3].

dovetail jigrouter table

Pro tip: Index pins ensure 0.01" pin alignment, reducing gaps by 80% on first pass[3].

10. Raised Panel Bits Profile Cabinet Doors

Horizontal raised panel bits form door profiles up to 2-1/2" wide, costing $30-$60 USD[2]. Vertical versions fit small tables; horizontals handle 85% of cabinetry[2]. They create 1/4"-1/2" reveals standard in kitchens[2].

router tablepanel jig

Pro tip: Use vertical bits on 1HP trim routers for 30% safer narrow rips under 3"[2][4].

Bonus Tip

Match Shank to Router Power

Use 1/4" shanks on 1HP trim routers for details, but 1/2" shanks on 2+ HP models cut 40% smoother with less chatter[4][5]. Mismatched shanks cause 25% more bit deflection. Upgrade collets for $15 to unlock premium bits.

What to Avoid

  • Running dull bits: Resharpen every 10-20 hours or replace; dull edges burn wood 50% more and snap 3x faster[2].
  • Ignoring RPM: Exceed 22,000 RPM on small bits and risk 30% heat damage; match to bit diameter[2][6].
  • Skipping dust collection: 70% of bit wear from chip recirculation; use hoods to extend life 2x[4].
  • Freehand without guides: Leads to 1/16" inaccuracies in 80% of cuts; always use tables or fences[1][7].