10 Questions to Ask Before Committing to a Whole-House Rewire (2026)

1. Do I actually need a full rewire, or will targeted upgrades solve my problem?

Not every old home needs a complete rewire. If your wiring is copper (not aluminum), your panel is in good shape, and your issues are limited to specific circuits, targeted upgrades — adding circuits, replacing outlets, upgrading a subpanel — may cost 60–80% less than a full rewire. Ask the electrician to explain exactly which portions of existing wiring must be replaced and why. If the answer is 'all of it, just to be safe,' get a second opinion.

N/A

Pro tip: Ask the electrician to identify each type of wiring in your home — knob-and-tube, cloth-insulated Romex, aluminum, modern Romex. Only the problem types need replacement.

2. What is the total scope — walls, ceilings, attic, crawlspace, and panel?

A rewire bid that covers 'all wiring' but excludes the panel upgrade, the weatherhead, or the meter base is incomplete. Conversely, a bid that includes opening every wall in the house when 70% of the runs can be fished through the attic and crawlspace is unnecessarily expensive. Make the electrician walk through every floor, the attic, and the basement to define the exact scope.

N/A

Pro tip: Ask the electrician to mark on a floor plan which walls need to be opened and which runs can be fished. This document becomes your scope of work.

3. Does the bid include drywall, plaster, and paint repair?

Many rewire bids cover electrical work only and leave you with holes, channels, and patches throughout the house. If drywall repair is excluded, you need a separate drywall and paint contractor, and the timeline extends by weeks. Some electricians include patching; most do not include skim-coating or paint. Clarify this before signing — a $12,000 rewire can become $18,000 once wall repair is added.

N/A

Pro tip: If the electrician excludes wall repair, get a drywall estimate before you sign the electrical contract. The combined cost is your real budget.

4. How many circuits will the finished house have, and where?

A rewire is your one chance to design the electrical layout of your home from scratch. Insist on a circuit schedule that lists every circuit, its amperage, and which rooms or appliances it serves. Kitchen countertops need dedicated 20A circuits. Bathrooms need GFCI-protected circuits. Bedrooms need AFCI protection. A rewire that simply replaces old wires with new ones on the same layout misses the opportunity to fix the design.

N/A

Pro tip: Plan for future loads now. Adding a circuit during a rewire costs $50–$100. Adding one after the walls are closed costs $500–$1,000.

5. Will the rewire bring the entire house up to current code?

Partial compliance is a trap. If the rewire brings some circuits to 2026 NEC standards but leaves others grandfathered, you have a patchwork system that confuses future electricians and complicates resale inspections. Ask whether the finished product will pass a full NEC inspection as new construction. If not, understand exactly which elements remain grandfathered and why.

N/A

Pro tip: Current NEC requires AFCI protection in almost every living space, GFCI in kitchens, baths, garages, outdoors, and basements, and tamper-resistant receptacles throughout. Verify these are in the bid.

6. What is the realistic timeline, and will my family need to leave?

A whole-house rewire in an occupied home typically takes 5–10 business days for a crew of 2–3 electricians, not counting inspection delays or wall repair. During active rewiring, power to parts of the house will be off for hours at a time. Ask whether you can stay in the house during the work. If there are young children or anyone dependent on medical equipment, temporary relocation may be necessary.

N/A

Pro tip: Ask the electrician to sequence the work so that bedrooms and a bathroom are re-energized first. This lets you stay in the house even while other rooms are being worked on.

7. How will you access the wiring — fishing, cutting, or a combination?

The access method determines 80% of the disruption and 30% of the cost. Fishing wires through existing wall cavities from the attic or basement minimizes drywall damage but takes more skill and time. Cutting channels in walls and ceilings is faster but destroys finishes. In older homes with plaster-and-lath walls, cutting is sometimes the only option because the wall cavities contain fire stops that prevent fishing. Know the plan before work starts.

N/A

Pro tip: In a two-story home, the second floor is usually the hardest to fish because there is no attic above the first floor ceiling. Ask how the electrician will handle inter-floor runs.

8. What happens if you open a wall and find asbestos or lead paint?

Homes old enough to need rewiring are old enough to contain asbestos insulation, asbestos-backed drywall mud, or lead paint. Disturbing these materials triggers EPA regulations and can require licensed abatement before the electrician can continue. This stops the job, adds cost, and extends the timeline. Discuss this scenario upfront so you're not blindsided by a $3,000 abatement bill mid-project.

N/A

Pro tip: If your home was built before 1978, consider getting a lead and asbestos survey done before the rewire starts. The cost is $300–$600 and eliminates the surprise.

9. What is the permit process, and who handles the inspections?

A whole-house rewire requires a permit in every jurisdiction. The permit process typically involves a rough-in inspection (wires exposed before walls are closed) and a final inspection (everything complete). The electrician should pull the permit in their name — if they ask you to pull it as the homeowner, they may be unlicensed. Confirm who schedules and attends the inspections.

N/A

Pro tip: Do not let anyone close walls before the rough-in inspection passes. Opening walls for a re-inspection costs you money, not the electrician.

10. What warranty do you offer on the workmanship?

Wire and device manufacturers warranty their products, but the quality of the installation — connections, routing, support, and code compliance — is on the electrician. A reputable electrical contractor offers at least a 1-year workmanship warranty, and many offer 3–5 years. Get the warranty terms in writing. Ask specifically what it covers: does it include opening walls to access a failed connection, or only the electrical repair itself?

N/A

Pro tip: A warranty is only as good as the company behind it. Check how long the contractor has been in business. A 5-year warranty from a company that folds in 2 years is worthless.

Bonus Tip

Coordinate the rewire with other projects happening at the same time

If you're also planning HVAC work, plumbing updates, or insulation upgrades, schedule them alongside the rewire. Open walls serve multiple trades. An HVAC contractor can run ductwork, a plumber can reroute supply lines, and an insulation crew can fill cavities — all before the walls get closed and patched. The coordination effort pays for itself by eliminating future wall openings.

What to Avoid

  • Signing a rewire contract without a detailed circuit schedule — 'we'll figure it out as we go' means you'll pay for change orders.
  • Letting the electrician skip the permit because 'it's easier' — unpermitted rewires destroy resale value and void insurance.
  • Assuming the cheapest bid covers the same scope — low bids often exclude the panel, the weatherhead, or wall repair.
  • Closing walls before the rough-in inspection — this is the most expensive mistake in a rewire project.