1. Has the Pest Infestation Been Fully Eliminated Before Repair Begins?
Repairing damage before the infestation is completely resolved is like patching a roof during a rainstorm. Termites, carpenter ants, or rodents will destroy new materials just as they destroyed the old ones. Get written confirmation from your pest control provider that the treatment is complete and the infestation is inactive. For termites, this typically means a clear follow-up inspection 30–90 days after treatment. Rushing into repair before clearance can waste $2,000–$10,000 in materials and labor.
Pro tip: Ask your pest company for a clearance letter on company letterhead — a reputable contractor will want to see this before starting work, and it protects you if the infestation recurs and damages new repairs.
2. Is This Cosmetic Damage or Structural Damage?
Cosmetic damage (chewed drywall, stained insulation, gnawed trim) is ugly but not dangerous and can often be addressed by a general handyman for $200–$800. Structural damage to load-bearing members — floor joists, wall studs, headers, sill plates, rafters — requires a licensed contractor and may need engineering review. Ask the repair company to clearly distinguish between cosmetic and structural issues in their quote so you can prioritize and budget accurately.
Pro tip: If the contractor identifies structural damage, ask whether a structural engineer's assessment is needed — many municipalities require an engineer's stamp on structural repair plans before issuing a building permit.
3. Do I Need a Building Permit for This Repair?
Structural repairs, electrical rewiring (common after rodent damage to wiring), and plumbing fixes often require permits. Working without a required permit can result in fines, failed home inspections during a future sale, and voided insurance claims. Ask your contractor directly whether permits are needed, and verify independently with your local building department — a 5-minute call can save you thousands in complications later.
Pro tip: If the contractor says no permit is needed for structural work, get a second opinion — some contractors skip permits to avoid inspection delays, which transfers all liability to you as the homeowner.
4. Will My Homeowner's Insurance Cover Any of This?
Most standard homeowner's policies exclude gradual pest damage (termites, carpenter ants), but sudden events like a rodent-caused electrical fire or a raccoon crashing through a ceiling may be covered. Some policies also cover the resulting water damage from pest-compromised plumbing. Call your insurance agent before starting repairs — they may require their own adjuster's inspection, and starting work before the adjuster visits can void your claim.
Pro tip: Even if the pest damage itself is excluded, the secondary damage often is not — for example, termite damage to a water pipe that causes flooding is typically covered as a sudden water event, not as pest damage.
How to do it:
- Call your insurance agent and describe the damage and its cause.
- Ask specifically whether the damage qualifies under any covered peril.
- If potentially covered, request an adjuster visit before any repair work begins.
- Document all damage with dated photos and keep all pest control invoices as supporting evidence.
5. What Type of Replacement Materials Will Resist Future Pest Damage?
If termites ate your floor joists, replacing them with the same untreated lumber invites a repeat. Ask the contractor about pressure-treated lumber, borate-treated wood (like Bora-Care), or steel framing alternatives for critical structural members. For insulation replacement after rodent damage, closed-cell spray foam is far more resistant to nesting than fiberglass batts. These upgrades cost 15–30% more upfront but dramatically reduce the risk of repeat damage.
Pro tip: Borate-treated lumber is toxic to termites and carpenter ants but safe for humans and pets once installed — it costs about $1.50–$2.00 more per board foot than standard lumber and provides permanent protection.
6. Should the Pest Control Company and Repair Contractor Coordinate?
The best outcomes happen when the pest technician and the repair contractor communicate directly. The pest tech knows exactly where the infestation was worst and can advise on which areas need the most attention, where preventive treatment should be applied to new materials, and what conditions to look for during the repair. Ask both parties if they are willing to do a joint walkthrough — this 30-minute meeting can prevent overlooked damage and redundant work.
Pro tip: Schedule the joint walkthrough before the contractor finalizes the quote — once they see the pest tech's findings, they often identify additional work that would have been missed, saving you from a costly change order mid-project.
7. What Is the Full Scope of Hidden Damage I Cannot See?
Visible pest damage is almost always the tip of the iceberg. Termites behind drywall, rodent-chewed wiring inside walls, and moisture damage from compromised insulation are invisible until demolition begins. Ask the contractor to include an allowance for hidden damage discovery in the quote — typically 10–20% of the estimated repair cost. This prevents sticker shock when the walls come open and unexpected damage appears.
Pro tip: A thermal imaging camera ($200–$400 to rent, or ask the contractor to bring one) can reveal moisture pockets, missing insulation, and active pest activity behind walls without any cutting — it often pays for itself in avoided surprises.
How to do it:
- Ask the contractor to perform exploratory openings in 2–3 suspect areas before finalizing the quote.
- Request a line item in the contract for a contingency allowance (10–20% of total).
- Establish a clear communication protocol — the contractor calls you with photos before proceeding with any work beyond the original scope.
- Get change orders in writing with pricing before authorizing additional repairs.
8. Does the Contractor Have Experience Specifically with Pest Damage Repairs?
General contractors handle pest damage repair differently than standard renovation work. Pest damage often involves compromised structural integrity, biohazard cleanup (droppings, urine, carcasses), mold from moisture intrusion, and coordination with pest control providers. A contractor experienced in pest damage will know to treat new lumber, install moisture barriers, and seal entry points during the repair. Ask for 2–3 references from past pest damage repair projects, not just general remodel references.
Pro tip: Ask the references specifically whether the pest problem recurred after the repair — this tells you whether the contractor properly addressed the root cause or just patched the visible damage.
9. What Warranty or Guarantee Comes with the Repair Work?
Standard contractor warranties cover workmanship for 1–2 years, but pest damage repairs have a higher failure rate if the infestation returns or was not fully eliminated. Ask whether the warranty covers re-repair if pests damage the new materials within the warranty period. Also confirm whether the pest control company's treatment warranty overlaps — ideally, the pest warranty should extend at least as long as the repair warranty so both sides cover their work simultaneously.
Pro tip: Get the warranty terms in writing as part of the contract, not just a verbal promise — specifically ask whether the warranty is voided if you switch pest control providers during the coverage period.
Bonus Tip
Get a Separate Pest Inspection After Repairs Are Complete
Once the contractor finishes and the walls are closed up, have your pest control company do a post-repair inspection. This confirms that no active pests were sealed inside during the repair, that new entry points were not inadvertently created, and that any preventive treatments were properly applied to new materials. This final check costs $75–$150 and provides peace of mind that the job was done right.
What to Avoid
- Starting repairs before the pest company confirms the infestation is fully resolved — new lumber and insulation will be re-damaged within weeks if active pests remain.
- Choosing the lowest-bid contractor without verifying their pest damage experience — general drywall or framing contractors often miss biohazard cleanup, entry point sealing, and preventive wood treatment.
- Skipping the insurance call because you assume pest damage is not covered — secondary damage (water, fire from chewed wiring) is often covered even when the pest damage itself is excluded.
- Accepting a verbal estimate instead of a written, itemized quote — pest damage repairs frequently uncover hidden issues, and without a written scope you have no basis for negotiating change orders.