10 Questions to Ask Before Hiring an Electrician for Partial Power Loss (2026)

1. Are you licensed and insured for residential electrical work in my state?

Electrical licensing requirements vary by state, and some states require specific residential endorsements beyond a general electrician license. An unlicensed electrician's work may void your homeowner's insurance coverage and fail municipal inspection. Ask for the license number and verify it on your state's contractor licensing board website before scheduling.

5 minutes to verify

Pro tip: In most states, the licensing board has a free online lookup tool. Verify the license is active, not just issued — expired licenses are a red flag.

2. What's your diagnostic fee, and does it apply toward the repair cost?

Most electricians charge $75–$200 for a diagnostic visit to identify the cause of partial power loss. Some apply this fee as a credit toward the repair if you hire them; others don't. Clarify this upfront so you can compare true costs between contractors. A "free estimate" electrician may be padding the repair quote to cover diagnostic time.

2 minutes

Pro tip: Ask if the diagnostic fee covers the full panel inspection or just the single circuit. Partial power loss often involves multiple circuit issues, and a limited diagnostic may miss related problems.

3. Can you come today, or what's your earliest availability for emergency calls?

Partial power loss can be an emergency — if it's caused by a failed main breaker or damaged service entrance, the problem can escalate to a fire risk. Ask about emergency availability and whether there's an after-hours surcharge. Most electricians charge 1.5x to 2x their standard rate for same-day or weekend emergency calls.

2 minutes

Pro tip: If the electrician can't come for 2+ days, ask them to walk you through basic safety steps over the phone — like which breakers to turn off — to stay safe while you wait.

4. What do you think is causing the partial power loss based on what I'm describing?

A good electrician can narrow down likely causes from your description alone — which rooms are affected, whether it happened suddenly or gradually, and whether anything triggered it. Common causes include a tripped main breaker, a failed leg on the service entrance, a loose neutral at the meter, or a damaged bus bar in the panel. Their initial assessment tells you how experienced they are with this type of issue.

5 minutes

Pro tip: If the electrician immediately quotes a panel replacement without asking diagnostic questions, that's a red flag. Partial power loss has multiple possible causes, many of which don't require a full panel swap.

5. Will you need to coordinate with the utility company, and who handles that?

If partial power loss is caused by a problem at the meter or service entrance, the utility company owns the equipment up to the meter and the electrician handles everything after it. Some repairs require the utility to disconnect and reconnect power, which can add a day or more to the timeline. Ask who coordinates the utility visit and whether there's an additional fee.

3 minutes

Pro tip: Call your utility company first. If they confirm the issue is on their side of the meter, you don't need an electrician at all — the utility repairs their equipment at no charge.

6. Do you pull permits for panel or service entrance work, and is that included in the quote?

Most jurisdictions require a permit for panel replacements, service upgrades, and major electrical repairs. The permit ensures the work gets inspected by the city or county and meets code. Some electricians include the permit cost in their quote; others list it as an add-on. Unpermitted electrical work can create problems when you sell the house or file an insurance claim.

2 minutes

Pro tip: Ask specifically: 'Will this work require a permit in [your city]?' — some electricians skip permits on smaller jobs to save time, but you're the one who pays the consequences later.

7. What's the warranty on your repair work?

Standard warranties on electrical repairs range from 1 to 5 years for labor. Parts like breakers and panels carry separate manufacturer warranties of 10–25 years. Get the labor warranty in writing — a verbal promise has no enforcement value. If the same problem recurs within the warranty period, the electrician should return and fix it at no charge.

2 minutes

Pro tip: Ask whether the warranty transfers if you sell the house. A transferable warranty adds value to your home and gives the buyer confidence in the electrical work.

8. Can you provide a written estimate before starting work?

A verbal quote over the phone is normal for initial conversation, but insist on a written estimate after the diagnostic visit and before any repair work begins. The written estimate should itemize labor, parts, permit fees, and any utility coordination costs. This protects you from surprise charges and gives you documentation for insurance claims.

Ask during initial call

Pro tip: Ask for the estimate via email rather than handwritten on-site. Email creates a timestamped record and makes it easier to compare multiple contractors.

9. Have you worked on my panel brand before?

If your partial power loss involves the electrical panel, the brand matters. Some panels — particularly Federal Pacific, Zinsco, and certain Challenger models — have known defect histories and require specific expertise. An electrician who has worked on your panel brand will diagnose issues faster and know which replacement parts are compatible.

2 minutes

Pro tip: If your panel is Federal Pacific Stab-Lok or Zinsco, the partial power loss may be a symptom of the panel's known failure mode. Ask the electrician directly whether they recommend replacement over repair.

10. Do you guarantee your work will pass inspection?

Any electrician confident in their work should guarantee that the repair will pass the municipal electrical inspection. If the inspection fails, the electrician should correct the work at no additional charge. This question separates experienced professionals from handyman-level operators who may cut corners on code compliance.

1 minute

Pro tip: If the electrician hesitates or says inspections aren't necessary, find a different contractor. In most jurisdictions, unpermitted and uninspected electrical work is a code violation that can affect your insurance coverage.

Bonus Tip

Get at least two quotes — but don't just pick the cheapest

The lowest bid on electrical work often means fewer diagnostic steps, cheaper parts, or skipped permits. Compare what's included in each quote: diagnostic scope, parts quality (OEM vs. generic breakers), permit costs, and warranty length. A $200 difference in quotes is meaningless if the cheaper contractor misses a secondary problem that causes another failure next month.

What to Avoid

  • Hiring an electrician who won't provide a license number — unlicensed electrical work voids most homeowner's insurance policies.
  • Agreeing to a full panel replacement before getting a diagnostic — partial power loss is often caused by a single component that costs $50–$300 to fix.
  • Accepting a quote that doesn't itemize parts and labor — bundled quotes hide markup and make it impossible to compare contractors.
  • Letting urgency push you into hiring the first person who answers the phone — a 2-hour delay to get a second quote can save you $500 or more.