1. Are You NADCA-Certified for Smoke and Fire Restoration?
Smoke-damaged ductwork requires specialized training beyond standard duct cleaning. The National Air Duct Cleaners Association (NADCA) offers a fire and smoke restoration certification that covers soot chemistry, proper containment, and deodorization protocols. Companies without this credential often use standard cleaning methods that can smear oily soot residue deeper into duct walls, making the odor permanent. Ask for the technician's NADCA certification number and verify it on the NADCA website before signing anything.
Pro tip: A NADCA-certified fire restoration specialist will also know how to document their work in a format that insurance adjusters accept, which saves you headaches during the claims process.
2. What Type of Smoke Residue Are You Equipped to Handle?
Not all smoke damage is the same. Protein fires from kitchen incidents leave a thin, nearly invisible residue with an intense odor. Synthetic fires from burning plastics and electronics produce thick, sticky black soot that requires chemical solvents. Wood-fire smoke creates dry, powdery residue that is easier to remove but penetrates deeply. The right cleaning method depends entirely on the residue type, and a company that treats all smoke damage the same will likely leave you with lingering odors.
Pro tip: If the fire involved burned plastics, wiring, or electronics, insist on a company that uses alkaline-based cleaning agents — acidic soot from synthetics will corrode metal ductwork if not neutralized properly.
3. Will You Inspect and Clean the Evaporator Coil and Blower Assembly?
Smoke particles are microscopic and settle on every interior surface of your HVAC system, not just the ducts. The evaporator coil's wet surface traps soot like a magnet, and the blower wheel's fins collect residue that gets re-aerosolized every time the fan runs. A duct-only cleaning after smoke damage is incomplete — the coil, blower, and drain pan must be cleaned too. This adds $300 to $600 to the job but skipping it means the system will keep pushing smoke odor through your home for months.
Pro tip: Ask them to photograph the evaporator coil before and after cleaning — if the coil still looks discolored after their work, the soot was not fully removed and the odor will return.
4. What Deodorization Method Do You Use, and Is It Included?
Cleaning removes visible soot, but smoke odor molecules embed in porous surfaces and require a separate deodorization step. Professional options include thermal fogging, which penetrates the same way smoke did, and hydroxyl generators, which break down odor molecules over 24 to 72 hours. Ozone machines work but are hazardous to people and pets during treatment. Some companies quote duct cleaning and then add $500 to $1,500 for deodorization as a surprise line item, so clarify this upfront.
Pro tip: Thermal fogging is generally the most effective single treatment for smoke odor in ductwork — if a company only offers spraying an encapsulant sealant inside the ducts, that is a band-aid approach that often fails within weeks.
How to do it:
- Ask whether deodorization is included in the quoted price or billed separately
- Ask which specific deodorization method they plan to use
- Ask how long the deodorization process takes and whether you need to vacate the home
- Confirm whether they guarantee odor elimination or only odor reduction
5. Can You Determine Whether the Ductwork Needs Replacement Instead of Cleaning?
Flexible ductwork with a fiberglass liner absorbs smoke so deeply that cleaning is often impossible — the porous insulation layer holds soot and odor permanently. Metal ductwork can usually be cleaned successfully, but not if it was exposed to extreme heat that warped or delaminated the joints. A reputable company will tell you honestly if sections need replacement rather than spending your money on cleaning that will not work. Full flex-duct replacement in an average home runs $2,000 to $5,000.
Pro tip: If you have flex duct and the fire was in or near the attic, replacement is almost always more cost-effective than cleaning — ask the company to price both options so you can compare.
6. Do You Carry Pollution Liability Insurance for Hazardous Residue?
Standard general liability insurance does not cover contamination incidents. If the cleaning crew dislodges concentrated soot into your living space or improperly disposes of hazardous residue from a fire involving lead paint, asbestos insulation, or synthetic chemicals, you could face a secondary contamination event and cleanup costs. A pollution liability policy specifically covers these scenarios. Ask for a certificate of insurance that lists pollution coverage with at least $1 million in coverage.
Pro tip: If the house was built before 1980, ask whether they will test for asbestos in duct insulation and mastic before disturbing it — disturbing asbestos during cleaning creates a far bigger problem than smoke residue.
7. Will You Provide Before-and-After Documentation for My Insurance Claim?
Insurance adjusters require photographic evidence and itemized scope-of-work documentation to approve smoke-damage duct-cleaning claims. A professional restoration company should photograph the interior of ducts, the coil, and the blower before work begins, then provide matching after photos plus a written report describing what was cleaned, what methods were used, and what was replaced. Without this documentation, your insurer may deny reimbursement for a job that can easily cost $1,500 to $4,000.
Pro tip: Send the company's scope of work to your adjuster for pre-approval before the cleaning starts — getting a denial after the work is done leaves you paying out of pocket.
How to do it:
- Ask the company if they provide a written scope of work before starting
- Confirm they will take dated, timestamped photos of all affected components
- Request a completion report with line-item costs that matches your insurance claim format
- Ask whether they have experience working directly with insurance adjusters
8. How Do You Contain the Work Area to Prevent Cross-Contamination?
Aggressive duct cleaning after smoke damage can dislodge concentrated soot and push it into rooms that were not previously affected. A qualified company should seal off registers in clean rooms, use negative air pressure with HEPA filtration at the work zone, and lay down protective floor coverings. If they plan to just hook up a vacuum to your furnace and blow everything through, that approach can spread soot residue throughout your home and into your belongings.
Pro tip: Walk through the house with the crew lead before they start and point out any rooms with undamaged belongings — good companies will seal those registers first and clean toward the contaminated zones.
9. What Is Your Callback Policy If Smoke Odor Returns?
Smoke odor can reappear days or weeks after cleaning, especially in humid conditions that reactivate embedded residue. A confident company will offer a 30- to 90-day callback guarantee that covers re-treatment at no additional charge. Companies that refuse to offer any warranty on odor elimination may be using superficial methods they know will not hold up. Get the guarantee in writing with specific terms about what constitutes a valid callback versus a new service call.
Pro tip: After the cleaning, wait at least a week before signing off that the job is complete — run your HVAC system normally and see if the odor returns during heating or cooling cycles before releasing final payment.
Bonus Tip
Change Your HVAC Filter 48 Hours After Cleaning, Then Again at 2 Weeks
Even after thorough duct cleaning, residual fine soot particles will continue to dislodge for the first few weeks as air flows through the system. Install a MERV-13 filter immediately after the cleaning, replace it after 48 hours to catch the initial burst of loosened residue, and replace it again two weeks later. After that, you can return to your normal filter schedule.
What to Avoid
- Do not run your HVAC system before professional cleaning after a fire — circulating smoke-laden air embeds soot deeper into ductwork, upholstery, and drywall, making full restoration more expensive.
- Avoid companies that offer to seal or encapsulate the inside of your ducts with a coating instead of properly cleaning them — this traps soot underneath and the odor almost always returns when the sealant breaks down.
- Do not attempt DIY duct cleaning with a shop vacuum after smoke damage — consumer vacuums lack HEPA filtration and will blow fine soot particles into your living space, creating a secondary contamination event.
- Never hire a smoke-damage duct cleaner based solely on the lowest bid — fire restoration requires specialized chemicals, equipment, and training, and a $199 duct cleaning deal will not address smoke damage properly.