7 Portable Charger Capacity Guide by Device (2026 Guide)

1. Smartphone: 5,000-10,000mAh for 1-2 Full Charges

A 5,000mAh power bank fully charges an average smartphone (3,000-4,000mAh battery) once, accounting for 70-80% efficiency loss.[2][4] Opt for 10,000mAh like Anker Nano for two charges at 20-45W speeds, costing $25-40.[3] Ideal for daily commutes without bulk.

5 minutes to charge USB-C cable

Pro tip: Choose PD-compatible banks for 20W fast charging on iPhone 15 or Android, cutting recharge time by 50% vs standard 5W.[4]

2. iPhone: 5,000-20,000mAh for 1-4 Top-Ups

iPhone 15's 3,349mAh battery needs a 5,000mAh bank for one full charge or 10,000mAh for up to two at $20-50 range.[3][4] Scale to 20,000mAh for all-day travel, providing 4 charges with MagSafe wireless at 15W.[3] Efficiency hits 65-75% on Lightning/USB-C models.

30 minutes for 50% charge Lightning or USB-C cable

Pro tip: Pair with MagGo 10,000mAh for 15W wireless charging, adding 50% battery in 30 minutes without cables.[3]

3. Tablet: 10,000-20,000mAh for 1-2 Full Recharges

iPad Air (8,000-10,000mAh battery) requires 10,000-20,000mAh banks like Baseus PicoGo for one full charge at 45W, priced $40-70.[1][2] Expect 1.5-2 recharges after 75% efficiency, perfect for travelers.[7] Higher 20,000mAh handles multiple sessions.

1-2 hours per charge USB-C PD cable

Pro tip: Select 45W+ output to match tablet PD needs, reducing charge time from 3 hours to 90 minutes.[1]

4. Bluetooth Headphones/Earbuds: 1,000-5,000mAh for 5-20 Charges

AirPods Pro case (500mAh) gets 5-10 charges from a 5,000mAh slim bank at $15-30, with low-current mode for safe 100-200mA draw.[2][6] Tiny 1,000mAh keychain models suffice for 5+ top-ups over days.[2] Total cost under $20 for pocketable options.

10 minutes per top-up USB-C or wireless pad

Pro tip: Use banks with low-current mode to prevent over-discharge on small 50-100mAh earbud batteries.[8]

5. Laptop: 20,000-30,000mAh+ with 100W+ Output

MacBook Air (50Wh/13,500mAh equivalent) needs Anker 25,000mAh at 165W for 1-1.5 charges, costing $80-120.[1][3] Gaming laptops demand 26,800-30,000mAh with PD 100W for 50-70% single charge.[4] Flight-approved up to 27,000mAh.[3]

2-3 hours for 50-80% charge USB-C PD 100W cable

Pro tip: Verify 100W+ USB-C PD support; Anker 25K's built-in cables charge laptops 4x faster than 45W rivals.[3]

6. Smartwatch: 1,000-5,000mAh for 10-50 Charges

Apple Watch (300mAh) battery gets 10-20 charges from 5,000mAh nano banks at $20-35, with 70% efficiency.[2][6] Compact 1,000mAh models handle 20+ days of use for multiple watches.[2] Low 5V/1A output prevents damage.

15 minutes per charge Proprietary or USB-C cable

Pro tip: Pick slim 5,000mAh with pass-through charging to power watch while recharging bank at 20W.[3]

7. Action Camera/Drone: 10,000-20,000mAh for 3-8 Sessions

GoPro Hero (1,720mAh) or DJI Mini drone (2,000mAh) needs 10,000mAh for 4-5 charges at $30-60, scaling to 20,000mAh for 8 sessions.[6][9] 45W output ensures fast 30-45 minute recharges with 75% efficiency.[1]

45 minutes per full charge USB-C cableAdapter if needed

Pro tip: Choose weatherproof 10,000mAh like Baseus with built-in cable for outdoor shoots, saving 20% charge time.[1]

Bonus Tip

Scale Capacity by Travel Length

For day trips, stick to 10,000mAh ($25-50) for 2 phone charges; multi-day needs 20,000-25,000mAh ($50-100) for laptop+phone combos.[2][7] Test real output with apps like Ampere, as efficiency drops 20-30% in heat.[3]

What to Avoid

  • Undersizing for multi-device use: A 5,000mAh bank drains in one laptop top-up (50Wh need), buy 25,000mAh+ instead.[3]
  • Ignoring wattage output: 10,000mAh at 20W takes 3 hours for tablets vs 1 hour at 45W—match device PD specs.[1]
  • Overlooking efficiency loss: Real charges are 65-80% of mAh rating due to heat/conversion; add 25% buffer.[2]
  • Skipping flight rules: Limit to 27,000mAh (100Wh) for carry-on; larger need checked bags with airline approval.[3]