7 Costly Mistakes Homeowners Make When Hiring an Electrician (2026)

1. Hiring based on price alone without verifying the license

The cheapest bid is frequently from an unlicensed handyman or an apprentice moonlighting without supervision. In most states, electrical work requires a journeyman or master electrician license — not just a general contractor license. Unlicensed work won't pass inspection, voids your homeowner's insurance electrical coverage, and creates a disclosure obligation when you sell. The $500 you saved on the job becomes $5,000 when the next buyer's inspector flags it.

10 minutes to verify

Pro tip: Every state has a free online license verification tool. Search '[your state] electrical license lookup' and confirm the license is active and matches the person who will do the work.

2. Not asking whether the job requires a permit

Many homeowners skip permits because the electrician doesn't mention them — or actively discourages them. Any work involving new circuits, panel modifications, or changes to the service entrance requires a permit in virtually every jurisdiction. Skipping the permit means skipping the inspection, which means no one verifies the work is safe. When you sell, the title search may reveal the unpermitted work, and you'll pay to have it redone and inspected.

N/A

Pro tip: If an electrician says 'you don't need a permit for this,' call your local building department and ask directly. The answer is free and authoritative.

3. Accepting a verbal quote instead of a written scope

A verbal quote of '$800 to rewire the kitchen' means nothing when the electrician shows up with a helper and bills you $1,400 for 'unforeseen conditions.' A written scope should specify: what circuits are being added or modified, what materials are included, whether drywall repair is included or excluded, and what the total price covers. Without this, you have no recourse when the final bill exceeds the estimate.

N/A

Pro tip: Ask for the quote to separate labor, materials, and permit fees. This makes it easy to compare bids and identify where estimates diverge.

4. Not confirming who will actually do the work

You vet and hire a master electrician, but an apprentice shows up to do the job unsupervised. This is both a code violation and a quality risk in most jurisdictions. Apprentices must work under direct supervision of a licensed journeyman or master. Ask during the hiring process: 'Will you personally be on site, or will you send a crew? Who on the crew holds the license?' Get the answer in writing.

N/A

Pro tip: When the crew arrives, ask to see the license of the person who will be doing the work. A legitimate electrician will not be offended by this request.

5. Failing to check insurance and bonding

A licensed electrician without general liability and workers' comp insurance transfers all risk to you. If a worker falls off a ladder in your home and has no workers' comp, you are liable. If a wiring error causes a fire six months later and the electrician has no insurance, you are suing an individual, not an insurer. Ask for a certificate of insurance and call the insurance company to confirm it is current — certificates can be forged or expired.

15 minutes to verify

Pro tip: Ask the electrician's insurance company to add you as a 'certificate holder.' This means you'll be notified if the policy lapses or is canceled.

6. Not getting multiple bids on large jobs

For work over $2,000 — panel upgrades, rewires, generator installs — getting only one bid leaves you with no frame of reference. Three bids from licensed electricians reveal the market rate and expose outliers. If two bids are at $6,000 and one is at $2,500, the low bid is cutting scope, using inferior materials, or planning to skip the permit. If two are at $6,000 and one is at $12,000, you know who's padding.

1-2 weeks

Pro tip: Give each electrician the same written description of what you want done. Comparing bids is impossible if each electrician is quoting a different scope.

7. Paying in full before the work is complete

Paying 100% upfront eliminates your leverage if the work is substandard, incomplete, or abandoned. A reasonable payment structure for electrical work is: no more than 30% deposit to secure scheduling and order materials, balance upon completion and successful inspection. An electrician who demands full payment before starting is either cash-strapped or planning to disappear. Either way, your money is at risk.

N/A

Pro tip: Never pay the final balance until the permit is closed and the inspection sticker is on the panel. The inspection is your proof that the work meets code.

Bonus Tip

Ask for references from the last 90 days, not the last 5 years

Old references tell you nothing about the electrician's current crew, workload, or quality. Recent references reflect current performance. Ask specifically: 'Did the work pass inspection on the first attempt? Was the final bill within 10% of the quote? Did the crew clean up after themselves?' These questions surface the issues that matter.

What to Avoid

  • Hiring someone who found you through a door-knock after a storm — legitimate electricians do not cold-call neighborhoods.
  • Signing a contract that includes an arbitration clause waiving your right to sue — this protects the contractor, not you.
  • Assuming a general contractor's license covers electrical work — in most states it does not, and the GC should hire a licensed sub.
  • Letting cost pressure push you toward 'a guy who does electrical on the side' — there is no side-job exception to licensing laws.