1. Check foundation walls for cracks and water damage
Look for horizontal cracks wider than 1/4 inch, which can indicate serious structural issues. White chalky residue (efflorescence) suggests water intrusion problems costing $3,000-15,000 to fix.
2. Inspect roof condition and gutters
Missing or damaged shingles, sagging sections, and clogged gutters signal potential $5,000-20,000 in roof replacement costs. Check for daylight showing through the attic.
3. Test all windows and doors for proper operation
Windows that don't open, close, or lock properly indicate frame settling or hardware failure. Budget $200-800 per window for repairs or replacement.
4. Look for signs of pest infestation
Termite tubes, wood damage, or rodent droppings require immediate professional treatment costing $1,200-3,000. Check basement, attic, and crawl spaces carefully.
5. Test HVAC system operation and age
Units over 15-20 years old may need replacement soon ($3,000-8,000). Check if heating and cooling work in all rooms, and inspect ductwork for damage or poor insulation.
6. Inspect electrical panel and wiring
Outdated panels (fuse boxes, Federal Pacific, Zinsco brands) pose fire risks and cost $1,500-4,000 to replace. Check for aluminum wiring or knob-and-tube systems.
7. Check water pressure and plumbing fixtures
Turn on multiple faucets simultaneously to test water pressure. Low pressure or brown water indicates pipe problems requiring $2,000-10,000 in repairs.
8. Test water heater age and capacity
Units over 10 years old may fail soon ($800-2,500 replacement cost). Check the nameplate for manufacture date and ensure capacity meets household needs.
9. Verify smoke and carbon monoxide detectors work
Test all units with the button and check battery levels. Missing or non-functional detectors violate safety codes and insurance requirements.
10. Look for lead paint in homes built before 1978
Peeling or chipping paint in pre-1978 homes likely contains lead, requiring $8,000-15,000 for professional removal. Look especially around windows and doors.
11. Check for asbestos in older insulation and tiles
Homes built before 1980 may contain asbestos in insulation, floor tiles, or shingles. Professional removal costs $5,000-20,000 depending on extent.
12. Test for radon levels in basement areas
Radon levels above 4 pCi/L require mitigation systems costing $800-2,500. Testing takes 48-72 hours with professional kits.
13. Inspect flooring for damage and wear
Look for warped hardwood, cracked tiles, or worn carpeting. Refinishing hardwood costs $3-8 per sq ft, while replacement ranges $5-15 per sq ft.
14. Check exterior siding and paint condition
Peeling paint, rotting wood, or damaged siding allows moisture intrusion and pest access. Full exterior painting costs $2,000-5,000, siding replacement $5,000-15,000.
15. Test all appliances that convey with sale
Run dishwasher, garbage disposal, and other included appliances through full cycles. Replacement costs range $400-2,000 per major appliance.
Bonus Tip
Attend the inspection in person and ask the inspector to explain any concerns. Take photos of potential problems for future reference and to help estimate repair costs. A good inspector will also point out maintenance items to address in your first year of ownership.
What to Avoid
- Skipping the inspection to save money or speed up closing
- Using an inspector recommended only by the seller's agent
- Focusing only on cosmetic issues while missing major system problems